Hubs
$189.00
The DT Swiss 240s Straightpull Center Lock hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive mountain bike wheel that will roll for thousands of nearly frictionless miles. And the Center Lock rotor attachment makes installing and removing rotors fast and simple.
$430.00
The DT Swiss 240s road hub hits the sweet spot between light weight and reliability. Lace it up and it'll roll for thousands of nearly frictionless miles. The legendary Ratchet System ensures precise engagement and exceptional dependability, no matter how hard you stomp on the pedals.
$435.00
The DT Swiss 240s MTB Center Lock Rear Hub hits the sweet spot between low weight and reliability. With multiple axle options and 6-bolt rotor adapters for the Center Lock spline, you can build up a high-end wheel for nearly any bike. On the winning end of countless World Cups and local races in every discipline from XC to enduro to downhill, these hubs are the centerpiece for thousands of nearly frictionless rides. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals.
$369.00 - $415.00
DT Swiss' strong, reliable 540 Tandem Rear Hub is built for the long haul. Whether you're out there for a week, a month, or on a daily commute, the high-end bearings, renowned DT Star Rachet internals, and additional spoke holes deliver thousands of nearly frictionless miles on your tandem or fully-loaded touring rig.
$169.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
$108.38
Hope Pro2 Evo Freehub Bodies
· Not compatible with Hope Pro2
$35.00
Converts a Stan's 3.30RD/3.30RDTi hub to a 12x142mm thru-axle.
$250.00
SRAM's Predictive Steering Hub is a dedicated hub interface for the inverted RockShox RS-1 fork. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the oversize, solid-aluminum Torque Tube axle delivers extreme strength and stiffness. It's equipped with standard 6-bolt rotor mounts and is not convertible to other axles.
$207.00
Finally, a hub worthy of the X0 name! Built to roll over the toughest mountain terrain, SRAM's X0 Boost Front Hub proves that being solid doesn’t mean being sluggish. Super-precise Speedball bearings mean lower resistance and faster revolutions. The wide 110mm Boost hub flange ensures your wheels will be stiff for precision steering and improved handling.
• Boost 110 x 15mm axle diameter
• Tapered aluminum axle is strong and light
• 32-hole
• Includes tool-free end caps and quick release skewers
• Weight: 130 grams
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
$108.38
Hope XD-11 Freehub Bodies
· For XD 11-speed cassette
· For Hope Pro 2 EVO hubs
· Contains drive side end cap, bearings and driver
$32.29
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo front hubs to 20mm through axle hubs
$119.99
Shimano Alfine Centerlock Dynamo Front Hub
- Compatible with 26 to 28" wheel sizes
- Light alloy QR lever and nut
- 6V, 3.0W output
- Centerlock rotor mount
- Center to Flange: 28.5 R , 20 L
- Color: Black
- Defined Color: Black
- Flange Diameter: 70 R , 70 L
- Front Axle: QR x 100mm
- Hub Drilling: 32, 36
- Hub/Brake Compatibility: Center-Lock Disc
- Spoke Interface: J-Bend
- Weight: 575 g
$339.00
The DT Swiss 240s Straightpull road hub hits the sweet spot between low weight and reliability. The straight pull spoke design makes for a stiff, responsive 11-speed Shimano-compatible wheel that will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement and exceptional reliability, no matter how hard you stomp on the pedals. Lace it up and hit the road.
$125.00
135/142mm features:
- Forged shell with aluminum axle
- 2 sealed cartridge bearings
- Front disc spacing
- Convertible 10 x 135mm QR/15 x 142mm Thru-Axle spacing
- Thru Axle and Q/R Conversion end caps included
- 135mm Flip-Off skewer included
- 226 grams
150mm features
- Forged shell with aluminum axle
- 2 sealed cartridge bearings
- 150mm OLD spacing using standard front brake disc alignment
- Designed for use with the Rock Shox Bluto fork
- Convertible 10 x 150mm QR/15 x 150mm Thru-Axle spacing
- Thru Axle and Q/R Conversion end caps included
- 150mm Flip-Off skewer included
- 226 grams
$80.00
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
$105.00
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
$17.50
Replacement end caps for Stan's NoTubes rear hubs with XD Driver.
$74.00
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
$25.00
- Converts Salsa Conversion hubs from 135/142 to 150mm in order to use with the RockShox Bluto Fork, or other 150 mm Thru-axle forks
- Requires the wheel to be re-dished
$29.21
Hope Front Axle Conversion Kits
· Compatible with Pro 2 and Pro 2 Evo hubs
· Converts all Hope Pro 2 and Pro 2 Evo hubs to 15mm through axle hubs
$25.00
12x142mm conversion endcaps for Hope Pro 2 Evo rear hubs.
$382.00
SRAM's X0 Hub offers lightweight, reliable performance. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions, and the tapered aluminum axle provides strength with minimal weight. This hub devours techy sections with it's super-smooth 6.9-degree engagement Double Time ratchet system. It accommodates standard 6-bolt rotors and comes with 12mm through-axle end caps and a 9mm quick release, so you can customize it to fit your ride.
$207.00
SRAM's X0 Hub stops at nothing for a lightweight hub that's worthy to wear the X0 name. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the tapered aluminum axle delivers strength with minimal weight. It's equipped with standard 6-bolt rotor mounts and is convertible from quick-release to 15mm to 20mm through-axles.
$69.00 - $85.00
Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.
$229.99
Shimano Alfine SG-S7001 Disc Brake Internally Geared Hub delivers an impressive gear range, spread across 8 speeds, all with the reliability and low maintenance you can only get with an internally geared hub.
- Center Lock Disc Rotor Compatible
- Rotor lockring not included
- Hub Center to Flange: 30.0mm
- Hub Drilling: 32-hole
- Flange Diameter: 92.5mm
- Drivetrain Speeds: 8
- Spoke Interface: J-Bend
$30.00
SRAM's 506 hub borrows technology from its more expensive brethren to bring you a solid hub at a great price. An aluminum hubshell with hi/lo flanges provide no-nonsense durability and even spoke tension. Dependable cup and cone bearings with polished races roll smooth for the long haul and a strong, steel quick-release axle holds up under pressure.
$34.00
Converts a Stan's 3.30/3.30Ti rear hub to a 12mm thru-axle. Compatible with both Type 1 and Type 2 rear hubs.
$179.99
The Antigram is a 36-H rear hub that is strong, light and reasonably priced with in-bound axle bolts that is both RHD/LHD switchable and guard compatible.
SPECS
- 2014-T6 forged aluminum hub shell
- 6903RS sealed cartridge ball bearings
- 9-T driver with 3-Pawn independent springs design and precision caged needle bearings
- RHD/LHD switchable
WEIGHTS
- With 14mm Chromoly Axle: 14.5oz / 411g
- MEASUREMENTS Drive Side
- Effective Flange Diameter: 49mm
- Non-Drive Side Effective Flange Diameter: 49mm
- Drive Side Flange to Center Distance: 30mm
- Non-Drive Side Flange to Center Distance: 30mm
Page 1 of 4
Next page