Parts & Accessories

Nobody's getting close to your bike with Saris' Locking Cable and Hitch Tite Combo. The Hitch Tite secures your rack to the car and is compatible with all current Saris Hitch Racks (sold separately). For additional protection, the included 8-foot, 10mm cable locks your bike to the rack. Walk away from your car knowing that others will only be able to admire your wheels from afar.

Saris' Locking Cable 8' keeps your bike and rack where you want them: attached to your vehicle. This braided, stainless-steel cable is 8-feet long for plenty of reach. Plus, the vinyl coating protects your vehicle's and bike's finish.

Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Saris' Traps Wheel Holder mounts easily to your Saris Single or Triple Track (each sold separately) to keep your front wheel secured. It accepts the wheel with little or no quick-release adjustment. Mounting hardware is included.

Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.

- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.

Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).

Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

One person can load and unload a boat with this unique retractable arm that fits inside your Thule load bars. - Supports up to 50% of the kayaks weight and prevents vehicle contact - Integrated load stop prevents boat from sliding off bar - Holds nearly every kayak shape and size - Fits Thule square bar rack system only

This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak

Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

Take sleek to a new level – the ingenious RidgeLine Towers integrate with flush-mount factory side rails so you can build a real rack that carries more. Strong and versatile, they attach easily and have a sleek design that aligns with your vehicle’s aerodynamic attitude. - Attaches a base rack system to vehicles with flush-mount factory side rails. RidgeClips and crossbars required for a complete system. - Both are sold separately. Use Fit My Vehicle to find the clips and crossbars. - Advanced design is strong and quiet and aligns with aerodynamic vehicle aesthetics - Works with JetStream, CoreBar and RoundBar crossbars - Unique clip design adapts to your rails for a secure, accurate fit - BarBed has 12° of pitch adjustment to optimize tower position and level bars - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Weight: 1.25 lbs - Dimensions: L 5.00” x W 5.25” x H 3.50”

Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system

Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 118cm / 47 in

The RockyMounts LoBall Track is a hardcore bike rack solution for channel systems commonly found in Toyota, Nissan, Chevy, and GMC truck beds. It includes locking quick release, lock core, and two keys.

If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang

Ultra premium lift assist carrier reduces up to 40lbs of a kayak's weight and allows side of vehicle loading, unloading, and strapping. Features - Gas struts lift and lower 40lbs or 90% of the kayaks weight - Load and unload kayaks at waist level, at the side of the vehicle for greater convenience and safety - Double extending arms lower the kayak up to 40” for faster loading and unloading - Corrosion-resistant kayak cradles expand to fit wide kayaks - 8 touch points of padded support for maximum protection for your kayak - Aluminum, double coated steel construction for corrosion resistance delivers a longer product life - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs Technical specifications - Load capacity Water Crafts: 1 kayak - Fits Aero Profile: Yes - Fits SquareBar: Yes - Lockable: Yes - One Key System compatible: Yes - Factory rack mounting hardware included: No - Carrying type: Lift Assist

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”

- Outer pad is constructed of 600D + PVC. A durable denier fabric with herringbone weave and DWR treatment for water repellency - Micro-brushed inner lining protects your tailgate from rub and wear marks - Raised bumpers facing into the truck box seat most frames snugly preventing bikes from coming into contact while shuttling - Raised square pads along the outer tailgate (small pad only) offer the additional security of holding forks in place - When the shuttle gets steep and rowdy, secure frames down with a Velcro-backed webbing loop and strap system - Grommet system offers the ability to lock bikes - Storage pocket - Two sizes - Small - 39.5" x 57" wide with 5 straps, Large - 47” x 61” wide with 6 straps

A flexible, kayak carrier with felt-lined saddles that make it easier to load and unload. Features - Easily load and unload the kayak with the pivoting felt-lined rear saddles that help glide and center a kayak onto the vehicle - Two independent pivoting saddles with angle-setting lever conforms to limitless range of hull shapes - Protects the hull with large, flexible, cushioned pads - Quickly secure the kayak using the center load straps with car-protective buckle bumpers and QuickDraw bow and stern tie-downs - Fits a variety of Thule rack systems, round bars and most factory racks due to T-Track and FlipFit brackets - Accommodates kayaks up to 36 in/90 cm wide and 75 lbs/35 kg Technical specifications - Load capacity: 75 lb - Dimensions: 5 x 8 x 5.5 in - Weight: 6.8 lb - Length of straps: 2x15' - Fits AeroBlade, SquareBar, and Xsporter Pro

Thule's easiest loading canoe carrier with universal roof-rack compatibility - Durable gunwales with ramped sides provide easy loading - Cushioned weather-resistant base padding protects canoe during transit -Strong, durable load straps with buckle bumpers protect car and canoe from scratches - FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket - Includes all load straps and bow/stern ratcheting Quick Draw tie-downs necessary to easily secure one canoe

Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.

Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.

Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.