Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek 110 headsets. • Technical Description: EC30/25.4-24tpi/H27/K|EC30/26/H12/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 30.1mm • Stem Clamp Dia.: 25.4mm • Top Stack Height: 27.1mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 30.1mm • Crown Race Seat Dia.: 26mm • Crown Race Type: Steel, Sealed • Bottom Stack Height: 11.65mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 • Weight: 93g

Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1.5-degrees so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

- Gyro compatible, 45/45 degree angular contact cartridge bearings, alloy crown race - Impact: 45x45 degree Campagnolo Integrated - S.H.I.S.: IS42/28.6|IS42/30 - Stack: 8mm/1mm - Color: Black, Orange, Red - Weight: 68g

Now you can dial in your stem/bar height and make sure your ride keeps looking good. • 6061 aluminum • Thickness: 3MM / 6MM / 12MM PER PACK • Fits 1-1/8” (28.6mm) steerer tubes • Brushed deep anodized

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: EC49/30/H12/x • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 12mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 83.01g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. Technical Description: ZS56/30/H4/x Bottom Type: ZS - ZeroStack Bottom Head Tube Inside Dia.: 55.95mm Crown Race Seat Dia.: 30.015mm Crown Race Type: Aluminum, Dual-Seal Bottom Stack Height: 4mm Bottom Bearing Type: Top-quality, sealed stainless steel bearings Material: 7075 aluminum Weight: 61.34g Part Number: BAA0156x

Cane Creek's AngleSet transforms your ride. It enables an effective head-tube angle adjustment of up to +/- 1-degree so you can fine-tune your mountain bike's front-end handling to best suit your riding style, local terrain and race course. Installation is straightforward because the AngleSet automatically adjust to fit different head tube lengths and angles. All AngleSet headsets have light, tough, and beautiful machined 7075 T6-aluminum cups with Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: IS52/40/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide • Material: N/A • Weight: 35.35g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 Series headsets. • Technical Description: ZS44/28.6/H15/K|ZS44/30/H4/x • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 15mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 • Weight: 95.62g

Ritchey's Logic Headset boasts machined aluminum cups for excellent longevity, light weight and super looks. A smaller upper angular cartridge bearing saves weight while a larger lower angular cartridge bearing boosts strength and durability.

1-inch model: • Bearing Type: Cup and Cone • Color: Silver/Black • Crown Race: 26 • Defined Color: Silver • Lower Stack Height: 10.5 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 26 mm • Weight: 130 g 1-1/8-inch model: • Bearing Type: Cup and Cone • Color: Silver/Black • Crown Race: 30 • Defined Color: Silver • Lower Stack Height: 10.7 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 26 mm • Weight: 140 g

The Ritchey Logic Comp threadless headset is constructed of steel and uses replaceable cartridge bearings. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 13 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 16.8 mm • Weight: 142 g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/UD|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: UD Carbon • Weight: 72g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/UD • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061, UD Carbon • Weight: 44g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 2 mm • S.H.I.S Lower: IS41 • S.H.I.S Upper: IS41 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 7 mm • Weight: 65 g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 5 mm • S.H.I.S Lower: ZS44 • S.H.I.S Upper: ZS44 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 10 mm • Weight: 130 g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 18 mm • Weight: 165 g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

This custom 7075-T6 aluminum pre-load bolt design is included with every Odyssey fork. - Fits both a 6mm and 8mm allen key. - Front brake cable thru-way hole for removal without disconnecting brake hardware. - Designed with an easy-cut thread groove if you cut your fork’s steerer tube down.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek 110 headsets. • Technical Description: EC30/25.4/H16/K|EC30/26/H12/K • Top Type: EC - External Cup • Top Head Tube Inside Diameter: 30.1mm • Stem Clamp Diameter: 25.4mm • Top Stack Height: 16mm • Top Bearing Type: Top-quality, sealed stainless steel bearings • Bottom Type: External Cup • Bottom Head Tube Inside Diameter: 30.1mm • Crown Race Seat Diameter: 26mm • Crown Race Type: Steel, Sealed • Bottom Stack Height: 11.65mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Material: 7075 aluminum • Weight: 85g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 26 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4 • Upper Stack Height: 18 mm • Weight: 163 g

RockShox's Headset Spacer Set is a perfect compliment to your RockShox fork. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish RockShox logos. You get two 5mm spacers, one 10mm, and one 15mm.