Parts & Accessories

Jandd Mono-Stay Rack Adaptor is used for bikes that have a wishbone-style configuration on the rear end.

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

- Soft non-slip webbing material - Triple strap strength to hold down cargo - Double vinyl hooks for secure mounting - 24-inch length works with most racks

Mount struts to your heart's content with Salsa's 8mm Strut Mount kit.

Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs

Jandd Bicycle Mounted Rack Clamps are for mounting racks with no braze-on points. - Stainless Steel Coated Clamp - Sold as a Pair

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

- Replacement stabilizers set for Bike Travel Bag Pro

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

The Jandd Reflector Mount allows riders to attach a reflector to a rack.

This stem holder comes in classic black and is designed to attach your Basil basket to the front wheel of your bike. This system is suitable for use with both men and women’s bicycles with ease. If you’re after performance and durability, this attachment provides all the strength and stability you need, keeping your basket firmly fitted to your bike. Not only does this reduce maintenance, it also means you can put your bike through more without the worry of your basket coming free. Perfect for enjoying enhanced safety and stability on the go. What’s more, because of it’s quality steel construction, this component will hold up well against the elements and last you for a long time to come. The fastening system is also suitable for various types of bikes and fits stems with a diameter of 22 to 25.4 mm. Browse more essential items from the Basil range online today, from baskets and bags, to essential fasteners and fixing essentials. Features: - Basil Permanent-S II stem holder. - Designed for fitting of baskets to the front of your bike. - Made from hard-wearing steel for longevity. - Suitable for handlebar stems measuring 22 to 25.4 mm.

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Thule's Pack n' Pedal Side Frames mount quickly and easily to the sides of their Pack 'n Pedal Tour Rack (sold separately). They allow you to use any model of pannier for increased luggage capacity and a lower center of gravity.

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

QuickClick mount for spring-style saddles. Works with all Topeak Wedge Bags. - Material: Injected nylon / Stainless steel - Weight: 50g / 1.76oz

Salsa's Post-Lock is a rack attachment point that can be positioned anywhere on your seatpost to provide a mounting point. - Strong rack attachment points - 34mm-wide rack mount threaded for M5 bolts - Stainless steel pivot and bolt - Available for 27.2 and 31.6mm diameter seatposts - Black anodized with laser-etched logo - 44g for a 31.6mm collar - Not for use on carbon seatposts - Note: Post-Locks do not have a lip like Salsa's Lip-Lock, Flip-Lock, and Rack-Lock so therefore cannot be used as a seatpost clamp.

- Rigid 6061-aluminum body prevents rust - Easy mounting to any flat surface - Sleeve removes to allow for use with 15mm or 20mm thru axle models

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.

- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket. - This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding. - This wire dome comes in classic black. - Provides complete protection for your dog and total peace of mind for pet owners when out cycling.

Axiom's Elastic Cargo Net keeps your cargo in place. Its 6-hook design and shock cord construction make it a flexible fit for most every rack and basket.

Lower mount kit for all Salsa's Alternator Racks (sold separately)

Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.