Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

650B

DT Swiss H 1700 Spline 30
$394.00 - $526.00
It's a fact: On an E-MTB you run into trail sections much faster than you have ever before considered possible. The H 1700 SPLINE 30 has the power to get you out of such situations as a winner and not face down in the dirt. Steering precision is covered by the strong spokes and the trademark DT Swiss wheel build with high and even spoke tension. The rim can take tires suited for fast riding on rugged terrain and supports them perfectly, even at low pressures. Reliable Ratchet System hubs finally make sure that you can come back and attack those gnarly sections of trail time and time again.
DT Swiss M 1700 Spline 30
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
DT Swiss EX 1501 Spline ONE 30
$565.00 - $776.00
With even the EWS race courses getting tougher and tougher and tire manufacturers offering Enduro-strong tires in 2.5-inch sizes, the demand from DT's pros for a wide, Enduro tough wheelset came up and DT responded by developing the EX 1501 SPLINE ONE 30. Often used as a front wheel to generate as much grip where you need it most, it is the wheel for those hunting after the toughest of tracks or those living right in the Alps. Strong, lightweight, and tough as nails, the EX 1501 30 is ready for just about anything.
DT Swiss XR 1501 Spline ONE 25
$552.00 - $750.00
Responding to the demand from top racers for even wider rims, DT have developed an XC-specific 25mm-wide rim profile. This is what's built into the XR 1501 SPLINE ONE 25. The result is a super capable, super light Cross Country wheel. It feels perfectly at home on the trails that have become tougher and rougher both up and down the mountain. And built with DT Swiss quality in every detail, from the hub internals to the spoke nipple, it makes sure you complete all the laps, weekend after weekend.
DT Swiss M 1700 Spline 25 Front Wheel
$348.00 - $519.00
Rainy days, wet soil, rocks and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most averse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.
Stan's NoTubes Baron S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stan's NoTubes Arch S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Arch S1 Wheelset - Use: Trail and Enduro - Internal Rim Width: 26mm - Optimal Tire Size: 2.25 to 2.5-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (1,882g) and 29-inch (1,974g)
Stan's NoTubes Crest S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
The Wheel Shop Mavic EN427 Disc/Novatec D881SB 27.5-inch Front
$204.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 20mm TA - Hub Spacing 110mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body - - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 27mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec D881SB - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30mm - Depth 22mm - Rim Model Mavic EN427 Disc - Skewers Included No
Race Face Atlas 30 Front Wheel
$414.99
Back to the roots of Race Face. Expanding on their game-changing Atlas line and developed in conjunction with Devinci Global Racing, these wheels are built for the toughest DH tracks on earth. Bring rock gardens to their knees, make step downs bow down, laugh in the face of 20 park laps a day. Pack an Atlas on your next DH trip and you’ll be smiling all the way down the track. HUB - Large oversized flange for improved bracing angle and larger bearings - Hub and bearing system designed and validated for longevity, smoothness, low drag and zero play - Wide bearing stance - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal Width - Tubeless Ready (tape and valves installed) - 4.5mm Offset improves spoke balance and wheel stiffness - 6069 Aluminum construction - Dent and flat resistant bead design
Stan's NoTubes Baron MK3 27.5-inch Front
$319.00
The 35mm internal width of the Baron MK3 brings Stan's unmatched traction and control to Plus tires. The Baron MK3 is optimized for 2.80 – 3.20-inch tires, and joins the Sentry and Major to offer the most rim width options for wider tires. The combination of a 35mm rim and Stan's patented ultra-low-profile sidewall means the Baron MK3 keeps you in control on even the most technical trails, while still rolling faster than conventional rim designs. Stan's low profile rim shape is also lighter by design, a great advantage for Plus wheels. The Baron MK3 wheelset includes the Neo hub with CNC-machined shell and updated axle and bearing placement for maximum durability. The cassette body has six pawls for quick engagement and reliable power transfer on the trail. Tubeless performance has never been as fast, easy, and reliable. The Baron MK3 brings out the most in your high-volume tires. Baron MK3 wheels include pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps. - Patented BST rim shape for improved handling and less rolling resistance with high volume tires - Maximum stability and control with a 35mm internal width - Stronger, stiffer, and lighter 6069 alloy and rim shape - Neo hubs with new Durasync freehubs accelerate quicker - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.80 – 3.20-inch Trail tires
The Wheel Shop Fratelli FX 25 XXX/Novatec DH82SB 27.5-inch Rear
$234.99
- Position Rear - Wheel Diameter/ISO 27.5'' / 584 - Axle Type 12mm TA - Hub Spacing 150mm/157mm - Wheel-Brake Comp. Disc IS 6-bolt - Freehub Body Shimano HG - Wheel Tire Type Tubeless Ready - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 25mm - Rim inner width range 22-27.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Novatec DH82SB - Wheel Weight - - Spoke Type DT Champion - Valve Presta - Rim External Width 30.8mm - Depth 22mm - Rim Model Fratelli FX 25 XXX - Skewers Included No
Race Face Atlas 30 Rear Wheel
$579.99
Back to the roots of Race Face. Expanding on their game-changing Atlas line and developed in conjunction with Devinci Global Racing, these wheels are built for the toughest DH tracks on earth. Bring rock gardens to their knees, make step downs bow down, laugh in the face of 20 park laps a day. Downhill and freeride strength rim built on the incredible 3-deg engagement Vault hub. Pack these wheels on your next DH trip and you’ll be smiling all the way down the track. HUB - Large oversized flange for improved bracing angle and larger bearings - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - Wide bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Individually sprung pawls - One length spoke used throughout wheelset (F&R) - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal Width - Tubeless Ready (tape and valves installed) - 4.5mm Offset improves spoke balance and wheel stiffness - 6069 Aluminum construction - Dent and flat resistant bead design
Race Face Next R 27.5-inch Rear Wheel
$774.99
- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)
Mavic XA Pro 27.5-inch Rear
$550.00
Engineered with the same spirit of innovation that made Mavic the first to create the mountain bike wheel system, and also the first to introduce the tubeless mountain bike wheel system, this versatile off-road wheelset elevates the trail riding experience. Made with a lightweight aluminum rim that has zero compromises in strength and lateral stiffness, it delivers dependable all-around performance on a variety of trail conditions and terrain. The rim features our ISM 4D technology to remove unnecessary material and also Fore drilling for the spoke attachment. This minimizes rotational weight, giving them a snappy, dynamic ride quality. The rims are 25mm wide with UST technology, making it easy to experience all the benefits of tubeless tires, including better traction, increased control, and a reduced risk of flats. The wheels are built up with 24 bladed Zicral spokes for lateral stiffness and just enough vertical compliance. Dynamic and lightweight feel for efficient climbing and added agility - ISM 4D machining makes the wheel lighter without compromising durability. - 25mm internal rim width Proven technologies for performance and durability - 24 straight-pull bladed Zicral spokes, front and rear - UST tubeless technology for improved traction and control and reduced risk of punctures - Fore drilling on the rims UST Tubeless Ready design gives you total control on challenging terrain - User-friendly tubeless technology for better traction and control with reduced risk of punctures - Wheels ship with tubeless rim tape installed.
DT Swiss EX 1501 Spline ONE 25 27.5-inch Front
$509.00 - $522.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss EXC 1200 SPLINE 35 Rear
$1,606.90
Learning from our very successful EWS riders, we designed the rims for the EXC 1200 SPLINE 35 to be tough enough for everything the best in the sport can throw at them yet light enough to spin all day. And, they're the right width to accommodate today's high-volume enduro tires. This rim is complemented by our completely new top-end Ratchet System hubs which maintain the lightweight theme, as do the bladed and butted straight-pull spokes. The result is any enduro rider's dream wheel: Peace-of-mind in the downhills and enough breath for a chat on the climbs. - SRAM XD MTB cassette-compatible
Race Face Turbine 27.5-inch Rear Wheel
$499.99
Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
The Wheel Shop Evo E-Tour 19/Formula FM-21-QR 27.5-inch Front
$38.99
- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes
Stan's NoTubes Flow S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)
Zipp 303 Firecrest Carbon Clincher Tubeless Disc Brake 650b Rear
$1,350.00
Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps
Zipp 3ZERO MOTO Carbon Tubeless 27.5-inch Rear
$1,049.00
Zipp's 3ZERO MOTO carbon enduro/trail wheels are inspired by moto to provide riders with the control and durability required for pure speed. Moto remains a powerful source of inspiration for good reason. Based in the racing hotbed of Indy, Zipp for more than three decades has used motorsports as an inspiration to develop pioneering carbon cycling innovations. Our single-wall approach, what we call Moto Technology, allows the rims to "pivot" from either side of the spoke bed while traversing rough terrain. As the wheel encounters obstacles, each edge of the rim is designed for compliance, creating the feel of extra suspension. For the rider, that means durability and control for greater speed. Moto Inspired. Control + Durability = Speed. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - TyreWiz tire-pressure monitoring device - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension
Stan's NoTubes Arch MK3 27.5-inch Rear
$370.00
Designed with input from Stan's Enduro World Series teams, the Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 rim weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan's NoTubes rims. - Tubeless ready with rim tape and valves installed - The perfect balance of strength and weight 24% wider than the Arch EX for improved stability with larger tires - Same low weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Stan's Neo 6-pawl, 36-point disc hubs feature a 10-degree engagement - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.25"-2.50" Trail tires
ENVE G27 ENVE Alloy Hub Wheelset
$2,550.00
What It Is The G27 is the G23's little big brother. Smaller in diameter and lighter in weight, the G27 is designed for the higher-volume tires demanded by many riders on rougher and looser terrain. At 320 grams, our lightest tubeless rim is 27mm wide and designed for tires marked 27.5 or 650B. Armed against pinch flats with the patent-pending Wide Hookless Bead, the G27 is at home off-road and capable on tamer stretches of singletrack. Who It's For Those seeking the challenge of drop-bar riding over more technical terrain that is typically frequented by mountain bikes will benefit from the additional air volume, durability, and anti-flat performance benefits provided by the G27. If your path leads you to rough roads, single tracks, and multi-day bikepacking adventures, the G27 may be for you. Why We Made It There is a place between road and mountain that is open to discovery. Beyond the range of your trail bike or the capabilities of your road bike. Terrain littered with contradicting challenges and demanding requirements are at odds with the bikes and products available today. We built the new G27 to thrive in this new environment because insights gained through building the world's best road and mountain bike rims told us that the perfect combination did not exist in our stable, or in our opinion, anywhere at all. The higher volume and lower pressures would demand MTB toughness and flat resistance, while big days and long miles would require the light weight and efficiency of a road machine. Above all, the combination of rough and rigid would require a wheel with the ride quality to make those long miles enjoyable and multi-day treks possible.
Stan's NoTubes Arch MK3 27.5 Front Wheels
$309.00
Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for Trail tires / 2.25 - 2.50 - Includes pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release; 20x110mm front wheels include 15x100mm end caps
Stan's NoTubes Crest MK3 27.5-inch Rear
$370.00
Wider and even lower profile, the new Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Stan's Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. - Tubeless ready with rim tape and valves installed - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling - Wider but even lighter than the original Crest - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Legendary Crest climbing and speed in a high volume rim - WideRight optimized for 2.00"-2.25" XC tires
Stan's NoTubes Sentry S1
$479.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Sentry S1 Wheelset - Use: Plus Tire Performance and Adventure - Internal Rim Width: 32mm - Optimal Tire Size: 2.5 to 3.0-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,972g), 27.5-inch (2,034g), and 29-inch (2,134g)
DT Swiss XMC 1200 Spline 30
$1,224.00 - $1,672.00
The XMC 1200 SPLINE is for anyone who enjoys high-speed climbing and descending. Fit with tubeless tires, the full carbon hookless rim massively reduces the chance of punctures, is super-light, and at 30mm rim width, works to perfection with wide all mountain rubber. The SPLINE hub is the lightest wheel hub ever built by DT Swiss, together with the bladed top end spokes and a perfect DT Swiss wheel build, it complements the carbon rim for the ultimate trail bike wheel set.
DT Swiss EX 1501 Spline ONE 25
$539.00 - $750.00
The Enduro incarnation of the SPLINE ONE line-up. Based on a rim that has survived top to bottom runs without a tire under world class riders such as Aaron Gwin, the EX 1501 SPLINE ONE 25 has nothing to prove when it comes to strength. For Enduro racers it comes in handy that it features tech details like the specially developed rim surface hardening process for increased durability at no additional weight. Being built of DT's highest-end components through and through, it should come as no surprise that Jared Graves and Richie Rude have been dominating the EWS on this exact wheelset.
DT Swiss HX 1501 Spline ONE 30 Front Wheel
$611.00 - $809.00
When you head into trouble on the trail, be it up or down, the HX 1501 SPLINE ONE 30 will get you out victorious. It has the power to attack burly terrain and to go fast everywhere else. Sitting right in the middle of the strength-to-weight and strength-to-width range, it works with many tire sizes and is the ideal choice for all E-MTB's meant to be ridden on proper MTB terrain. High end through and through, from the lightweight Ratchet System hubs to the industry-leading alloy rim and profile design, the HX 1501 SPLINE ONE 30 isn't a one-day wonder, but a trusty long-term partner.
Page 1 of 3 Next page