Filter By:
- Lubes/Cleaners (211)
- Tools (874)
- Workstands (54)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance
$50.00
To keep your bike running like the day you got it, pick up Finish Line's Pro Care Bucket Kit 6.0. It gives you what you need to clean and lube your bike to perfection: Wet lube, Dry lube, Bike Wash cleaning solution, Finish Line's Grunge Brush as well as their Multi Degreaser. And, the kit even comes with a handy bucket and an easy-to-read bike maintenance guide, too!
$9.00
Keep your bike running smoothly with Sunlite's Dry Lube w/Silicone. It's silicone based, so you can use it on metal, plastic, rubber, almost everywhere. Being a dry lube, it doesn't attract dirt and grime, either.
$29.95
• 15mm L-shaped hex wrench to fit Shimano rear thru-axle freehubs
• Through-hardened industrial quality steel
• Chamfered tips for a precision fit
$17.95
The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm.
The BBT-4 is compatible with the following sealed cartridge bottom brackets:
• Campagnolo Veloce
• Xenon
• Mirage
• Daytona
• Avanti
$9.95 - $12.95
Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.
$13.99
The Cassette Lockring Socket w/ Pin is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise.
- Fits all Shimano, SRAM, SunRace, SunTour, Chris King, and other HG standard cassette lockrings and Shimano disc brake lockrings
- Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise
$11.99 - $60.50
Royal Blood mineral oil is a specially formulated, low viscosity hydraulic fluid that ensures consistent performance of Magura brakes.
- Doesn't absorb water
- Lubricates entire braking system
$32.99
Elite DOT Bleed Kit replacement fittings for SRAM Bleeding Edge, Formula, Hayes, and Hope
- Black seals provide easy identification for use with DOT fluid systems only
- Set of 5 fittings
$69.99
The Dual Insert Kit is the ultimate stealth-mounted mountain bike tool set which features a pair of our innovative tools that discretely and securely hide in the ends of a handlebar: the Tubeless Insert Kit and the Tool Insert Kit.
The Tubeless Insert Kit is constructed from lightweight, durable machined aluminum and features a hardened stainless-steel reamer. The kit is easily accessible for quick tire repairs and comes with five high-quality tubeless plugs that can also be stored inside its body.
The Tool Insert Kit is constructed from lightweight, durable machined aluminum and features hardened steel tool bits. The kit is easily accessible for quick repairs and comes with 11 different tool bits ideal for today’s modern bikes.
The Kits also doubles as bar-end plugs and come with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings.
Tool Insert
- Machined Aluminum Bar plug tool kit
- Hex bits: 2,3,4,5,6,8, 10mm
- Phillips bit
- T10,T25,T30
- Fits all standard MTB handlebars
Tubeless insert
- Machined aluminum bar plug tubeless repair kit
- 5 tire plugs
- Combined reamer and insertion tool
- Fits all standard MTB handlebars
$59.99
- Durable fiber reinforced Composite Matrix construction.
- Optimized side-load design for easy access in compact frames.
- Available in right-side configuration only.
- Integrated storage container.
- CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately)
- CO2 inflator head
- V Pro 17 multi-tool with tubeless reamer and tire plug kits
$85.00
- 200 HOUR/1 YEAR SERVICE KIT (INCLUDES DUST SEALS, FOAM RINGS, O-RING SEALS, CHGR2 DAMPER SEALHEAD, DEBONAIR (SILVER) SEALHEAD—ZEB SELECT+/ULTIMATE A1 (2021)
$19.99
Lezyne's Chain Drive chain tool is constructed from chromoly for strength and reliability. Its ergonomic shape gives you a comfortable surface to grip while trying to knock out those stubborn 9/10-speed chain pins. Plus, it boasts four integrated spoke wrenches including Road and MTB Mavic Splined, 3.22, and 3.45 for extra versatility.
$29.99
The Vittoria Road Tubeless Tool-Kit will make the installation and removal of your tubeless tires easy and quick. Each kit contains one pair of pliers and clips per package. The patented plier design provides a gentle yet secure grip on the tire, which is needed when removing the tire bead from the rim. This creates space for the included clips to be inserted between the tire and rim. Additionally, the handles of the pliers are designed to be used as tire levers, during mounting and dismounting, and are designed to prevent damage to the rim and tire. The Vittoria Road Tubeless Tool-Kit is necessary for the Air-Liner Road removal from your wheel.
$31.99
- Ergonomic forged aluminum side plates with link storage
- Enhanced anti-corrosion black CRV bits wrapped
- Chrome vanadium steel fastening hardware
- Hex 2/2.5/3/4/5/6/8mm
- T10/T25/T30
- Phillips
- Flathead
- New chain-breaker tool (included hex 8/10mm wrench, 4 spoke wrenches)
- Multi-function flat tool (bottle opener, disc brake wedge, rotor truing tool)
- 173g
$1.99 - $4.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$22.00
Disc brakes are arguably the most beneficial update in modern bicycle design, but not when disc rotors rub against the brake pad. Let there be flawless, flush contact, and zero pad and rotor rubbing by using this forged, hardened and polished steel Rotor Truing Fork to keep a perfectly true rotor. With two different tuning depths for repairing shallow and sharp deformations, this is the ideal solution for road disc brakes, mountain bikes, electric bikes, urban and fitness bikes. Available separate, or find it in our Team Edition and Ride Prep Tool Kits.
- Forged, hardened CRV tool steel
- Two different tuning depths for precision truing of disc brake rotors
- Angled design promotes ample spoke clearance and efficient leverage
- Polished finish looks good for the life of the tool
- Precision 2.0mm slots fit Shimano, SRAM and other major rotor brands
- Found in our Team Edition and Ride Prep Tool Kits
- Works great with the Pro Truing Station rotor alignment gauge
$14.00 - $15.00
The majority of bicycle maintenance is delicate, precision work. But occasionally, getting the job done requires maximum leverage and control. The 8 and 10mm L-Handle Allen Wrench Tools are designed to create optimal torque for pedals and cranks. With an extra deep contact arm, long lever arm and ergonomic handle, having great control during high-torque moments is reassuring. These Allen wrenches also have a convenient ball end for quick turns of a bolt.
$12.95 - $13.00
The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes:
Hex wrenches: #3, 4, 5, 6
Screwdrivers: Phillips #2
Length: 89mm
Weight: 85g
Warranty: Lifetime
$35.99
The Chain Pig II hands-free chain cleaner will change the way you think about cleaning your chain. Just one use with Pedro's latest solvent-free degreasers and you too will become a believer just as so many riders and skeptical pro mechanics have. The Chain Pig II provides a simple, efficient, and effective way to clean the chain without making a mess or wasting valuable degreaser. Each element has been designed to outperform and outlast the competition. The upper and lower bodies are made from super-strong, chemical and impact-resistant plastic and new Chain Pig II features stainless steel button arms, along with other improvements, to further increase durability. The brush wheels, which have the toughest job in any chain cleaner, feature larger diameter bristles optimized for stiffness, effective cleaning performance, and superior durability. The drag-free derailleur hook is a game-changer providing simple use, real hands-free operation, and alignment allowing seriously high run speeds that increase effectiveness and efficiency. The Chain Pig II has also been designed for efficient cleaning and degreaser usage. The system allows effective cleaning using only 1 fluid ounce of degreaser. The stage one brushes effectively pull degreaser up from the reservoir and onto the chain. The chain is then scrubbed from all angles and finally pulled through a large durable sponge that wicks excess and contaminated fluid from the chain minimizing mess and dripping. The sponge also wipes the chain, filtering larger contaminants, and returning usable degreaser back for more cleaning.
- Pro-grade brushes and super absorbent sponge eat chain grime for breakfast, and are always hungry for more
- Surgically enhanced with stainless steel hardware and body sculpting ready for epic drivetrain battles
- Innovative quick-lock closure and drag-free derailleur hook for easy use and hands-free operation
- Lean and mean, this hog requires only 1oz of degreaser
$6.95
Park Tool's Derailleur Clutch Wrench is a small, thin wrench with 5.5mm and 3mm openings designed to fit the rear derailleur clutch tension adjuster on Shimano XT, SLX, Deore, Saint and Zee rear Shadow Plus (+) derailleurs and all previous Shadow Plus models.
$21.95
Park Tool's professional-quality Snap Ring Pliers are made from forged, heat-treated cro-moly steel with a return spring and vinyl-dipped grips. The RP-2 has 1.3mm tips on bent nose blades for medium, internal snap rings. The tips of the RP-2 open from 22mm down to 2mm (center to center).
$20.40
- Reamer extension for use on the HTR-1 tool set
- Increases depth on 2-piece reamer/facers (1", 1-1/8", 1-1/4") to 27mm
- Designed for deep-insertion headset cups (Chris King Steelset). Sold individually
$13.66
- Used when facing BB86/92 bottom bracket shells and reaming is not required
- Used in conjunction with HTR-1 head tube reaming and facing set (PK-6710), 750.2 centering cone adapter (PK-6735) and 690-XL facing cutter (PK-6730)
$38.95
Keep your work area tidy with Park's Bench Top Small Parts Holder. It's constructed from rugged stainless steel with a clear, acrylic hinged top that lets you see what's inside. It also includes 4 removable bins that are perfectly sized to hold small parts, cable end caps, grease and whatever other little items you can think of.
$59.95
Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides your saw blade. And, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4-inches.
$19.95
Park’s Shop Apron protects your clothes and provides large pockets to hold frequently needed tools. It’s made of heavy-duty, 7-ounce poly/cotton twill for comfort and durability.
$11.95
Having trouble getting at internal spoke nipples? Park's Square Socket Internal Nipple Spoke Wrench comes to your rescue. The extra-long socket fits recessed nipples on most deep-section aero wheels. And, the ergonomic handle is comfortable even after you've built wheels for the entire team.
$8.95
Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.
$15.95
The MTC-30 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along.
- 2.5, 3, 4, 5, 6 and 8mm hex wrenches
- T25 & T30 Torx compatible drivers
- Combo cross/straight tip screwdriver
- 8 & 15mm box wrenches
- Key ring holder
- Weight: 131g (4.62 ounces)