Tools/Maintenance

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)

Park's Heavy-Duty Tire Levers handle the toughest tire-and-rim combinations including difficult downhill and freestyle tires. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, forged-steel levers are a full 8-inches long for superior leverage.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

FRESH out the bowels of Muc-Off Research and Development comes the NEW Bio Grease! Designed specifically for bicycle use, Muc-Off Bio Grease possesses a unique formula that prevents corrosion and water ingress so your bike’s components will last long into the future! Use Muc-Off Bio Grease to increase your performance, and ensure every ride will be smoother than your last. Muc-Off *Biodegradable Bicycle Grease is specifically blended for the unique ‘low speed’ applications found on bicycle parts where reducing friction is paramount. This premium formulation is based on renewable resources, and has a combination of extreme pressure lubricity additives and natural ‘slip’ giving it unrivaled performance in its class! Bio Grease also has the added benefit of being readily biodegradable and extremely resistant to water wash off, which helps prevent corrosion, reduce friction and improve the performance of moving parts. The guys at Muc-Off are dedicated to making eco friendly products that won’t harm you, your bike or the planet and Bio Grease is no exception. This new grease is fully biodegradable and free from any nasty petroleum based oils! NOT for use on Bicycle chains *Only contents are biodegradable. - Prevents corrosion and water ingress so your bike’s components will last longer - Specially formulated for "low speed" applications unique to bicycle parts, where reducing friction is paramount - Extremely resistant to water wash-off, which helps prevent corrosion, reduce friction and improve the performance of moving parts - Fully biodegradable and free from petroleum-based oils

- Highly versatile dry weather chain lubricant - Deep penetrating, durable P.T.F.E. chain lubricant - Hold up to extreme conditions which can destroy ordinary lubes - Comfort bottle with pipette system for ease of use and application

A great way to hold small parts, tools and components during a repair, Park Tool's Benchtop Overhaul Mat features multiple small pockets and one large work area. It's perfect for suspension work or to organize parts for installation. • Made of a rubber-like PVC • Cleans easily and looks great on any bench • Measures: 14.7” x 7” (38cm x 18cm)

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of particularly high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working. - With Rapidaptor technology for lightning-fast bit changes - Bitholders, magnetic, for easier application of the screw

- Investment cast, heat-treated tool steel wrench features 3-side and 4-side openings. - Durable plastic handle reverses to provide ideal ergonomics with both openings. - Precision-cut wrench openings are perfectly sized for fit and speed. The Pro Spoke Wrench takes ergonomics and versatility to the next level. The dual-sided design, with both 3-side and 4-side openings, features a reversible handle. When using either wrench opening, the curved and sculpted plastic handle fits perfectly in your fingers and positions them on either side of the spoke for ideal leverage and control. The wrench is investment cast, heat-treated steel ready for years of service and the precision-cut openings are perfectly sized for fit and speed.

Fingerprints and glossy marks are now a thing of the past. Matte Finish Detailer has been specifically developed for satin matte paints, matte finishes and matte vinyl wraps. The premium-grade formula will leave any matte surface with a streak and gloss-free protective finish that reduces dirt adhesion. - Quick to use spray developed specifically for matte finishes - Leaves a non-sticky, streak and gloss-free protective finish - Carbon Fiber safe - Biodegradable

Precision Bit Driver With Hex & Torx Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Compatible with Multi-Torque Bit Set. - Includes 2 & 2.5mm hex, and T25 torx bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, ¼" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.

Precision Bit Driver With Screwdriver Bits - Ergonomic machined aluminum body with bearing-mounted rotating cap for precision and control. - Magnetic bit drive accepts any standard 1/4" hex bit. - Internal storage for two bits. Also compatible with Multi-Torque Bit Set. - Includes JIS compatible PH#1, JIS compatible PH#2, and 5mm Flat Blade bits. Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning, and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, 1/4" magnetic hex bit drive, and bearing-mounted rotating end cap. Add the compatible Multi-Torque Bit Set to store eight additional bits on board.

Periodic hydraulic remote bleeds are necessary to maintain consistent performance. RockShox's Bleed Kit has everything you need to keep your Reverb and X-Loc remotes functioning at their best.

Screw Type Chain Tool The Apprentice Chain Tool 1.1 is a workhorse designed to make chain removal, installation, and adjustments simple, safe, and comfortable. This shop-quality screw-type chain tool is ready for years of professional use and the new 1.1 bridge geometry fits modern chains including SRAM 12 Speed Road. - Updated bridge geometry fits modern chains, including SRAM 12 Speed Road. - Visit pedros.com/chainfit for compatibility info. - Ergonomic handles for efficiency, comfort, and safety. - Integrated guide pin sheer slot. - Replacement pin stored in the handle.

- Shop grade steel cable/housing/spoke cutter with comfort grip - Cuts brake housing without crushing the coiled steel reinforcement

- Made from heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. - Ergonomic, soft-plastic, TPR handle for comfort, leverage, and easy handling. - Includes: T7, T10, T15, T20, T25, T30, and T40 wrenches. The torx style fastener is quickly becoming standard fare on the modern bicycle. Having the right torx wrenches in the right sizes is essential for the modern mechanic. Pedro's Pro T/L Torx Wrench Set is up to the challenge and offers features you won't find anywhere else. We started by choosing heat-treated S2 tool steel to ensure the ultimate in strength and lasting performance. We then added extra length to each leg of the wrench offering better leverage and easy access to hard-to-reach bolts. Finally we finished off by over molding the wrenches with an ergonomic, soft plastic, TPR handle that fits in your hand like a glove providing the ultimate in grip and comfort. The set includes T7, T10, T15, T20, T25, T30, and T40 sizes all backed by Pedro's lifetime warranty.

The Torx-style fastener is becoming the new standard for modern bicycles and components. Pedro's led the way offering the first Y-style Torx wrench to meet the demand. Recently named VeloNews Editor's Pick for Best 3-Way Wrench, Pedro's popular Y-Wrenches feature heat-treated tool steel construction and a durable plastic body designed to stand up to the harsh conditions of professional use. The new, improved ergonomic design features a refined body shape for improved fit and comfort, new quick-spin bit sleeves for speed and versatility, and bit-size indication for quick tool identification. Includes T10,T25, and T30 sizes, perfect for the most common Torx hardware sizes found on modern bicycles and components. - New improved ergonomic y-style handle design - Features refined body shape, quick-spin bit sleeves, longer bits, and bit-size indication - Designed to stand up to the harsh conditions of professional use - Backed by Pedro's lifetime warranty.

The Classic MR GREASE with our "Micro Resistance Polymer" technology provides the ultimate protection and performance for bearings and suspension forks. MR Grease polymerizes to the surfaces leaving a barrier of grease that reduces wear, provided corrosion protection, and is waterproof. MR Grease is carbon fiber safe. Our Classic Liquid Grease can be used to thin MR Grease to create a lighter weight viscosity if desired.

Dot 5.1 Brake Fluid, 4 OZ Bottle. Viscosity-stable across highest range of operating temperatures. 4 OZ Size is perfect for home mechanic use.

TorqSocket kit works with any mini-tool containing a 5 mm Allen wrench (or single 5 mm Allen key). Applies correct torque on component bolts for safety and to prevent damage to carbon parts. - Includes 3,4.5mm hex bits, T20 & 25 Torx - Packaged in own carrying case - Material: Hardened steel - Size: 2.1" x 2" x 0.9" - Weight: 75g

This professional quality adjusting cap tool is used to install and remove adjusting caps of Shimano Hollowtech II crank/bottom bracket systems. The unique, dual-density, screwdriver handle provides improved ergonomics and comfort while assisting in control of torque applied to the cap. The precision laser-cut tool bit is made from heat-treated tool steel for strength and durability. - Ergonomic dual-density screw driver handle for comfort and torque control - Tool bit is precision laser-cut, heat-treated, tool steel for strength and durability

Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.

Topeak's Handlebar Stabilizer secures your front wheel and bar when your bike is in the stand, making it easier than ever to work on your ride.

Professional quality heat-treated steel with hand-saving no-slip plastic grip and ergonomic design for maximum leverage and comfort. - Precision cut for an exact fit with no slippage - Lifetime warranty on all Pedro's tools

To keep your bike running like the day you got it, pick up Finish Line's Pro Care Bucket Kit 6.0. It gives you what you need to clean and lube your bike to perfection: Wet lube, Dry lube, Bike Wash cleaning solution, Finish Line's Grunge Brush as well as their Multi Degreaser. And, the kit even comes with a handy bucket and an easy-to-read bike maintenance guide, too!

Keep your bike running smoothly with Sunlite's Dry Lube w/Silicone. It's silicone based, so you can use it on metal, plastic, rubber, almost everywhere. Being a dry lube, it doesn't attract dirt and grime, either.

• 15mm L-shaped hex wrench to fit Shimano rear thru-axle freehubs • Through-hardened industrial quality steel • Chamfered tips for a precision fit

The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

The Cassette Lockring Socket w/ Pin is designed to work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. - Fits all Shimano, SRAM, SunRace, SunTour, Chris King, and other HG standard cassette lockrings and Shimano disc brake lockrings - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise

Elite DOT Bleed Kit replacement fittings for SRAM Bleeding Edge, Formula, Hayes, and Hope - Black seals provide easy identification for use with DOT fluid systems only - Set of 5 fittings

The Dual Insert Kit is the ultimate stealth-mounted mountain bike tool set which features a pair of our innovative tools that discretely and securely hide in the ends of a handlebar: the Tubeless Insert Kit and the Tool Insert Kit. The Tubeless Insert Kit is constructed from lightweight, durable machined aluminum and features a hardened stainless-steel reamer. The kit is easily accessible for quick tire repairs and comes with five high-quality tubeless plugs that can also be stored inside its body. The Tool Insert Kit is constructed from lightweight, durable machined aluminum and features hardened steel tool bits. The kit is easily accessible for quick repairs and comes with 11 different tool bits ideal for today’s modern bikes. The Kits also doubles as bar-end plugs and come with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings. Tool Insert - Machined Aluminum Bar plug tool kit - Hex bits: 2,3,4,5,6,8, 10mm - Phillips bit - T10,T25,T30 - Fits all standard MTB handlebars Tubeless insert - Machined aluminum bar plug tubeless repair kit - 5 tire plugs - Combined reamer and insertion tool - Fits all standard MTB handlebars

- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits

- 200 HOUR/1 YEAR SERVICE KIT (INCLUDES DUST SEALS, FOAM RINGS, O-RING SEALS, CHGR2 DAMPER SEALHEAD, DEBONAIR (SILVER) SEALHEAD—ZEB SELECT+/ULTIMATE A1 (2021)

Lezyne's Chain Drive chain tool is constructed from chromoly for strength and reliability. Its ergonomic shape gives you a comfortable surface to grip while trying to knock out those stubborn 9/10-speed chain pins. Plus, it boasts four integrated spoke wrenches including Road and MTB Mavic Splined, 3.22, and 3.45 for extra versatility.

The Vittoria Road Tubeless Tool-Kit will make the installation and removal of your tubeless tires easy and quick. Each kit contains one pair of pliers and clips per package. The patented plier design provides a gentle yet secure grip on the tire, which is needed when removing the tire bead from the rim. This creates space for the included clips to be inserted between the tire and rim. Additionally, the handles of the pliers are designed to be used as tire levers, during mounting and dismounting, and are designed to prevent damage to the rim and tire. The Vittoria Road Tubeless Tool-Kit is necessary for the Air-Liner Road removal from your wheel.

- Ergonomic forged aluminum side plates with link storage - Enhanced anti-corrosion black CRV bits wrapped - Chrome vanadium steel fastening hardware - Hex 2/2.5/3/4/5/6/8mm - T10/T25/T30 - Phillips - Flathead - New chain-breaker tool (included hex 8/10mm wrench, 4 spoke wrenches) - Multi-function flat tool (bottle opener, disc brake wedge, rotor truing tool) - 173g

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

- Easy to use tool for checking chain wear

Disc brakes are arguably the most beneficial update in modern bicycle design, but not when disc rotors rub against the brake pad. Let there be flawless, flush contact, and zero pad and rotor rubbing by using this forged, hardened and polished steel Rotor Truing Fork to keep a perfectly true rotor. With two different tuning depths for repairing shallow and sharp deformations, this is the ideal solution for road disc brakes, mountain bikes, electric bikes, urban and fitness bikes. Available separate, or find it in our Team Edition and Ride Prep Tool Kits. - Forged, hardened CRV tool steel - Two different tuning depths for precision truing of disc brake rotors - Angled design promotes ample spoke clearance and efficient leverage - Polished finish looks good for the life of the tool - Precision 2.0mm slots fit Shimano, SRAM and other major rotor brands - Found in our Team Edition and Ride Prep Tool Kits - Works great with the Pro Truing Station rotor alignment gauge

The ultimate trailside companion. This high-tensile steel multi-tool features a precise fit and finish and side grips for a secure handhold even with gloves on. The M5 includes: Hex wrenches: #3, 4, 5, 6 Screwdrivers: Phillips #2 Length: 89mm Weight: 85g Warranty: Lifetime

- Used when facing BB86/92 bottom bracket shells and reaming is not required - Used in conjunction with HTR-1 head tube reaming and facing set (PK-6710), 750.2 centering cone adapter (PK-6735) and 690-XL facing cutter (PK-6730)

Park's Threadless-Fork Saw Guide ensures a straight, accurate cut on threadless carbon forks. Specially designed to accommodate wider, carbon specific saw blades, the SG-8 ensures a perfect cut every time. Slide on the guide, clamp it down and the specially shaped hardened-steel cutting slot guides your saw blade. And, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4-inches.

Park’s Shop Apron protects your clothes and provides large pockets to hold frequently needed tools. It’s made of heavy-duty, 7-ounce poly/cotton twill for comfort and durability.

Having trouble getting at internal spoke nipples? Park's Square Socket Internal Nipple Spoke Wrench comes to your rescue. The extra-long socket fits recessed nipples on most deep-section aero wheels. And, the ergonomic handle is comfortable even after you've built wheels for the entire team.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

The MTC-30 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible drivers - Combo cross/straight tip screwdriver - 8 & 15mm box wrenches - Key ring holder - Weight: 131g (4.62 ounces)

The HBH-3 securely holds handlebars in place on any bike in any position while in a repair stand. It's useful for brake bleeding, cable and housing routing, lever adjustment, or any scenario where you want to prevent the handlebars from rotating, including storage or working with the bike rotated upwards. With its articulating clamps and adjustable straps, the HBH-3 can easily be attached in a wide variety of positions onto almost any handlebar, seatpost, frame, fork, or repair stand. Anodized aluminum construction with soft rubber straps. - Straps install onto any round tube from 12mm to 60mm (0.5" to 2.4"), as well as most irregular and aero-shaped tubing found on bicycles - Rotating articulating clamps allow for secure installation onto virtually any bicycle in a wide range of positions - Usable extension length of 18" to 32" (45cm to 81cm) - Collapses and folds to 17" (43cm) for storage

Securely holds the TS-4.2 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

The TWB-36 is a crow foot style wrench used with any 3/8-inch drive torque wrench and drive tools with 36mm wrench flats such as Park Tool LRT-2, LRT-3, LRT-4 and BBT-18 to verify components are torqued to the correct specification. Constructed from heat-treated 4130 laser-cut steel and plated for long life.

Park's adjustable linkage shop clamp is found in more shops than any other professional level clamp. The 100-9C features solid cast aluminum construction and durable replaceable clamp covers. Clamp has reliefs on both jaws for cable routing. - Fits PRS-6, PRS-7, and PRS-8 stands made before 6/96 - Fits bike frame tubes from 1" to 1-5/8" (25mm to 41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Uses 468B jaw covers

Keep your most-needed bike repair tools and supplies close at hand with Park's Work Tray. It easily installs on your Park PRS-15, PRS-10, or PRS-11 Repair Stand (sold separately). And it features 2 separate compartments, a lube holder, a tool/towel bar, a tab system that holds plastic grocery bags and 2 receiver pods for extra accessories.

The DAG-2.2 is an indispensable shop tool that can be used to both measure and straighten misaligned derailleur hangers solving a high percentage of shifting problems. - Gauge bar made of heavy gauge, chrome plated steel - Adjusts to fit 20" to 29"+ wheels - Replaceable threaded tip - Upgraded large inner shaft for added strength* - Tighter tolerances for improved accuracy* - Improved clearance and reach to fit more frame/hanger combos including low clearance thru-axle derailleur hangers* *Compared to DAG-2

Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.

Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.

Keep your most commonly used tools close at hand with this clever, multi-function tool holder. The TK-4T was painstakingly designed with pockets and holders for specific tool shapes and sizes as well as some generic storage areas. The Tool Kaddie rotates for easy access and is molded from a durable composite material. - Bench Top Mount sits firmly on any flat surface - Specific slots and holders for 3-way hexes, screwdrivers, P-Handles, pliers/cutters - Generic slots and holders to hold a wide variety of tools and small parts - Mounting location to directly attach HXH-2P or HXH-2T P-Handle Holders (sold separately) - Built-in receiver port for PTH-1 Paper Towel Holder (sold separately)