Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.
At work, home, wherever there's a computer, plug Blackburn's Flea USB Charger in and you can charge your Flea light. It works with any standard USB port.
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
- Rack mount bracket only - Fits TL-L225 taillight
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
Even if you're not near an electrical outlet, with Blackburn's Flea USB + Solar Charger Kit you can still recharge your Flea light. The solar panel is capable of fully charging the Flea in 5-6 hours of full sun. It also charges anything else that uses a USB plug. At work, plug the USB charger in to your computer and you can charge the Flea for your ride home.
When you need hands-free light, Blackburn's Flea Helmet/Head/Hat Mount is there for you. It allows you to clip your Flea headlight to your noggin so wherever you look you have the Flea to light your way.
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.
Light & Motion's 11.1v 3-cell Li-ion Battery is nice and small and it's lithium-ion technology means impressive run times, while its gossamer weight of only 180 grams means it's easy to carry in a pocket or packs. It also comes with a convenient mounting strap.
This mount securely attaches your Light and Motion Vis 180 Micro taillight to a standard rear bicycle rack (taillights and racks sold separately).
This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.
Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Light & Motion's 7.4v 2-cell Li-ion Battery is compact and lightweight to power your light without weighing you down. It slips into a jersey pocket or pack or attaches to your bike via the convenient integrated rubber strap.
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Light & Motion's Vis 180 Aero Post Pad lets you easily attach your Vis 180 taillight to the back of your aero seatpost so you can be fast and visible.
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
Lezyne's Infinite Light Power Pack is a portable power pack that doubles runtimes of compatible Lezyne LED units. Compact, versatile design quickly and securely mounts to bars and frames. Integrated cable plugs directly into lighting systems. Power pack doubles as a backup USB charger for compatible USB rechargeable accessories. 20 Wh capacity. 14-inch cable with adjustable Velcro strap.
Lezyne's LED Handle Bar Mount Adapter is a composite matrix adapter to replace the rubber strap that ships on 2016 and later models of Macro XL, Power XL, Super XXL, and Deca XXL lights, so that they can be used with the Aluminum Handlebar Mount, the Composite Handlebar Mount, Aluminum Helmet Mount, or Composite Handlebar Mount.
Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.
Lezyne's Aluminum Helmet Mount is a durable accessory for Lezyne Mini XL, Power XL, Super XL, Deca, and Mega Drive lights. It has a stamped and machined aluminum base plate, a compression ring, a Composite Matrix spherical pivot, cradle and a Velcro strap which attaches the mount to the helmet. The spherical pivot allows the user to adjust the position of the light in all directions.
Problem Solvers' Braze-on Light mount threads into your fork or fender eyelets, allowing you to mount lights or accessories. It's lower position is great for getting your light closer to the ground for better visibility.
Attaches Blackburn Local Lights to any rack.
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
The NiteRider Lumina Stick-On Mount is ideal for non-vented helmet mounting applications. Mount it to your favorite downhill/MX style helmet, or explore the versatility of your Lumina headlight by mounting it onto an industrial hard hat. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series
Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems
The NiteRider Tail Light Rack Mount gives you the option to mount your tail light directly onto your rack-ready/-equipped bike via this rack mount accessory.
Taillight Seat Stay Mount
Page 1 of 3 Next page